Logging Source-Interface - Cisco Nexus 7000 Series Reference Manual

L Commands

logging source-interface

To enable a source interface for the remote syslog server, use the logging source-interface command.
To disable the source interface, use the no form of this command.
Syntax Description loopback
virtual_interface
Defaults
None
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to enable a source interface for the syslog server:
switch# configure terminal
switch(config)# logging source-interface loopback 5
switch(config)#
OL-25806-03
logging source-interface loopback virtual_interface
no logging source-interface loopback virtual_interface
Enables the loopback interface.The range is from 0 to 1023.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
logging source-interface
259