Callhome Send - Cisco Nexus 7000 Series Reference Manual

callhome send

callhome send
To send a Call home message to all configured destinations, use the callhome send command.
Syntax Description
configuration
diagnostic
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to send a Call home configuration message:
switch(config)# callhome send configuration
trying to send configuration callhome message
switch(config)#
Related Commands Command
callhome
callhome test
show callhome
Cisco Nexus 7000 Series NX-OS System Management Command Reference
34
callhome send [configuration | diagnostic]
(Optional) Sends a configuration message.
(Optional) Sends a diagnostic message.
Modification
This command was introduced.
Description
Enters the Call home configuration mode.
Sends a test message to all configured Call home destinations.
Displays the Call home configuration.
C Commands
OL-25806-03