Cdp Enable - Cisco Nexus 7000 Series Reference Manual

C Commands

cdp enable

To enable Cisco Discovery Protocol (CDP) on an interface, use the cdp enable command. To disable
CDP, use the no form of this command.
Syntax Description This command has no arguments or keywords.
Defaults
None
Command Modes
Global configuration mode (config)
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to enable CDP on an interface:
switch(config)# enable cdp
switch(config)#
This example shows how to disable CDP on an interface:
switch(config)# no cdp enable
Related Commands Command
cdp advertise
OL-25806-03
cdp enable
no cdp enable
Modification
This command was introduced.
Description
Configures the CDP version supported by the device.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
cdp enable
37