Cisco Nexus 7000 Series Reference Manual page 221

F Commands
This example shows how to configure the FCoE frame type filter for an ERSPAN session:
switch(config)# monitor session 1 type erspan-source
switch(config-erspan-src)# filter frame-type fcoe fc-did 2
Related Commands Command
filter (ERSPAN)
filter (SPAN)
filter frame-type arp
filter frame-type eth
filter frame-type ipv4
filter frame-type ipv6
monitor session
OL-25806-03
Description
Configures the filters for an ERSPAN session.
Configures the filters for a SPAN session.
Configures the ARP frame type filter for the ERSPAN session.
Configures the FCoE frame type filter for the SPAN or ERSPAN session.
Configures the IPv4 frame type filter for the SPAN or ERSPAN session.
Configures the IPv6 frame type filter for the SPAN or ERSPAN session.
Places you in the monitor configuration mode for configuring a SPAN or
ERSPAN session.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
filter frame-type fcoe
193