Cisco Nexus 7000 Series Reference Manual page 631

Show Commands
show ptp clock foreign-masters-record
To display information about the state of foreign masters known to the Precision Time Protocol (PTP)
process, use the show ptp clocks foreign-masters-record command.
Syntax DescriptionT interface
ethernet
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.2(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display information about the state of foreign masters known to the PTP
process:
switch# show ptp clock foreign-masters-record interface ethernet 7/1
RP/0/0/CPU0:demo#show ptp clocks foreign-masters
P1=Priority1, P2=Priority2, C=Class, A=Accuracy,
OSLV=Offset-Scaled-Log-Variance, SR=Steps-Removed
GM=Is grandmaster
---------
Interface
---------
Eth7/10
Eth7/1
OL-25806-03
show ptp clock foreign-masters-record {interface [ethernet]}
Specifies an interface.
(Optional) Specifies an Ethernet interface.
Modification
This command was introduced.
-----------------------
Clock-ID
-----------------------
0:18:ba:ff:ff:d8: e:16 255
0:18:ba:ff:ff:d8: e:16 255
Cisco Nexus 7000 Series NX-OS System Management Command Reference
--- ---- ---- --- -----
P1 P2 C A OSLV
--- ---- ---- --- -----
255 248 254 65535
255 248 254 65535
show ptp clock foreign-masters-record
--------
SR
--------
0 GM
0 GM
603