Logging Timestamp - Cisco Nexus 7000 Series Reference Manual

logging timestamp

logging timestamp
To set the logging time stamp units, use the logging timestamp command. To reset the logging
timestamp units to the default, use the no form of this command.
Syntax Description microseconds
milliseconds
seconds
Defaults
None
Command Modes
Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to set the logging time stamp units to microseconds:
switch# configure terminal
switch(config)# logging timestamp microseconds
switch(config)#
Related Commands Command
show logging
timestamp
Cisco Nexus 7000 Series NX-OS System Management Command Reference
260
logging timestamp {microseconds | milliseconds | seconds}
no logging timestamp {microseconds | milliseconds | seconds}
Specifies the time stamp unit in microseconds. The default units are seconds.
Specifies the time stamp unit in milliseconds.
Specifies the time stamp unit in seconds.
Modification
This command was introduced.
Description
Displays the logging time stamp configuration.
L Commands
OL-25806-03