Description (Eem - Cisco Nexus 7000 Series Reference Manual

description (EEM)

description (EEM)
To add a description to an Embedded Event Manager (EEM) applet, use the description command. To
remove the description, use the no form of this command.
Syntax Description description
Defaults
None
Command Modes Embedded event manager
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to add a description to an EEM applet:
switch# configure terminal
switch(config)# event manager applet counter-applet
switch(config-applet)# action 1.2 counter name count1 value $variable op dec
Switch(config-applet)# description "counter policy for acme"
switch(config-applet)#
Related Commands Command
show event manager
policy
Cisco Nexus 7000 Series NX-OS System Management Command Reference
100
description description
no description
Comment or a description that is added to an EEM applet.
Modification
This command was introduced.
Description
Displays information about the configured EEM policy.
D Commands
OL-25806-03