Filter Vlan Include-Untagged - Cisco Nexus 7000 Series Reference Manual

F Commands

filter vlan include-untagged

To apply a VLAN access map to one or more VLANs and include untagged frames on a port with Layer
3 subinterfaces, use the filter vlan include-untagged command. To remove a VLAN access map to one
or more VLANs with untagged frames on a port with Layer 3 subinterfaces, use the no form of this
command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Config-monitor configuration (config-monitor)
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to apply a VLAN access map to one or more VLANs and include untagged
frames on a port with Layer 3 subinterfaces:
switch(config)# monitor session 1
switch(config-monitor)# filter vlan 1-20 include-untagged
switch(config-monitor)#
This example shows how to remove a VLAN access map to one or more VLANs with untagged frames
on a port with Layer 3 subinterfaces:
switch(config-monitor)# no filter vlan 1-20 include-untagged
switch(config-monitor)#
Related Commands Command
filter vlan
OL-25806-03
filter vlan include-untagged
no filter vlan include-untagged
Modification
This command was introduced.
Description
Applies a VLAN access map to one or more VLANs.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
filter vlan include-untagged
199