Commit (Session Manager - Cisco Nexus 7000 Series Reference Manual

C Commands

commit (Session Manager)

To validate and apply the commands in the Session Manager configuration session, use the commit
command.
Syntax Description verbose
Defaults None
Command Modes
Session configuration
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines
The commit command results in a validation of the entire Session Manager configuration, and, if valid,
the configuration is applied to the device,
This command does not require a license.
Examples This example shows how to commit a Session Manager configuration:
switch# config session ACL_tcp_in
Config Session started, Session ID is 1
Enter configuration commands, one per line.
switch(config-s)# verify
Verification Successful
switch(config-s)# commit
Commit Successful
switch#
Related Commands Command
abort
exit
show configuration
session
OL-25806-03
commit [verbose]
(Optional) Displays a detailed version of the results of the commit command.
Modification
This command was introduced.
Description
Deletes the session and exists session configuration mode.
Exits session configuration mode without committing the commands.
Displays information about the Session Manager configuration session.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
End with CNTL/Z.
commit (Session Manager)
91