Show Snmp Trap - Cisco Nexus 7000 Series Reference Manual

show snmp trap

show snmp trap
To display the Simple Network Management Protocol (SNMP) notification enable status, use the show
snmp trap command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the SNMP notification enable status:
switch(config)# show snmp trap
Trap type
---------
aaa server state-change
callhome
entity fru
license
snmp authentication
vrrp
link
bridge topologychange
bridge newroot
stpx inconsistency
stpx loop-inconsistency
stpx root-inconsistency
Cisco Nexus 7000 Series NX-OS System Management Command Reference
646
show snmp trap
Modification
This command was introduced.
Enabled
-------
No
No
Yes
Yes
No
No
No
No
No
No
No
No
Show Commands
OL-25806-03