Cisco Nexus 7000 Series Reference Manual page 339

N Commands
Examples This example shows how to configure an NTP server:
switch(config) config t
switch(config)# ntp server 190.0.2.10 key 123 prefer use-vrf RED
switch(config)#
This example shows how to remove an NTP server:
switch# config t
switch(config)# no ntp server 190.0.2.10 key 123 prefer use-vrf RED
switch(config)#
Related Commands Command
ntp peer
show ntp peer-status
show ntp peers
OL-25806-03
Description
C
onfigures a device as an NTP peer.
Displays the status of all NTP servers and peers.
Displays all the NTP peers.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
ntp server
311