Ntp Logging - Cisco Nexus 7000 Series Reference Manual

N Commands

ntp logging

To enable Network Time Protocol (NTP) logging, use the ntp logging command. To disable NTP
logging, use the no form of this command.
Syntax Description This command has arguments or keywords.
Defaults
Disabled
Command Modes
Global configuration mode (config)
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1)
Usage Guidelines
This command does not require a license.
Make sure that you are in the correct virtual device context (VDC). To change the VDC, use the switchto
vdc command.
Examples This example shows how to enable NTP logging:
switch# config t
switch(config)# ntp logging
switch(config)#
This example shows how to disable NTP logging:
switch# config t
switch(config)# no ntp logging
switch(config)#
OL-25806-03
ntp logging
no ntp logging
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
ntp logging
299