D Commands
diagnostic ondemand iteration
To configure the number of times that the on-demand test runs, use the diagnostic ondemand iteration
command.
Syntax Description
number
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure the number of times that the on-demand test runs:
switch# diagnostic ondemand iteration 992
Related Commands
Command
show diagnostic
ondemand
OL-25806-03
diagnostic ondemand iteration number
(Optional) Number of times that the on-demand test runs. The range is from 1 to
999. The default is 1.
Modification
This command was introduced.
Description
Displays information about on-demand tests.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
diagnostic ondemand iteration
127