Port-Type - Cisco Nexus 7000 Series Reference Manual

P Commands

port-type

To configure a port type for the Simple Network Management Protocol (SNMP) port monitoring, use the
port-type command. To delete the port-type configuration for port monitoring, use the no form of this
command.
Syntax Description
access-port
all
trunks
Defaults None
Command Modes Port-monitor configuration (config-port-monitor)
Supported User Roles network-admin
vdc-admin
Command History Release
4.1(2)
Usage Guidelines This command does not require a license.
Examples
This example shows how to configure a port type for the SNMP port-monitor configuration:
switch(config)# port-monitor name PM1
switch(config-port-monitor)# port-type all
switch(config-port-monitor)#
This example shows how to remove a port-type configuration:
switch(config-port-monitor)# no port-type all
switch(config-port-monitor)#
Related Commands Command
port-monitor activate
OL-25806-03
port-type {access-port | all | trunks}
no port-type {access-port | all | trunks}
Configures port monitoring for access ports.
Configures port monitoring for all ports.
Configures port monitoring for trunk ports.
Modification
This command was introduced.
Description
Activates the specified port-monitor policy.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
port-type
325