Cisco Nexus 7000 Series Reference Manual page 123

C Commands
Syntax Description invalid-crc
poll-interval
absolute
rising-threshold
rising-threshold
event
event-id
falling-threshold
falling-threshold
delta
invalid-words
link-loss
protocol-error
rx-performance
signal-loss
sync-loss
tx-performance
Defaults None
Command Modes Port-monitor configuration (config-port-monitor)
Supported User Roles
network-admin
vdc-admin
Command History Release
4.1(2)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure an SNMP counter:
switch(config) port-monitor name PM1
switch(config-port-monitor)# counter invalid-crc poll-interval 30 absolute
rising-threshold 10000000 event 100
OL-25806-03
tx-performance [poll-interval poll-interval {absolute rising-threshold rising-threshold
event event-id [falling-threshold falling-threshold event event-id] | delta rising-threshold
rising-threshold event event-id [falling-threshold falling-threshold event event-id]}]}
Configures the invalid-crc counter.
(Optional) Poll interval for counter in seconds. The range is from 0 to 2147483647.
Specifies the absolute type threshold.
Configures the rising-threshold value.
Rising-threshold limit. The range is from 0 to18446744073709551615.
Configures the rising-threshold event.
Event ID from the event configuration.The range is from 1 to 65535.
(Optional) Configures the falling-threshold value.
(Optional) Falling-threshold limit. The range is from –2147483648 to 2147483647.
(Optional) Specifies the delta type threshold.
Configures the invalid-words counter.
Configures the link-loss counter.
Configures the protocol-error counter.
Configures the ingress (rx) performance counter.
Configures the signal-loss counter.
Configures the sync-loss counter.
Configures the egress (tx) performance counter.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
counter
95