Show Diagnostic Ondemand Setting - Cisco Nexus 7000 Series Reference Manual

show diagnostic ondemand setting

show diagnostic ondemand setting
To display information about the on-demand diagnostic test for a module, use the show diagnostic
ondemand setting command.
Syntax Description setting
Defaults None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display diagnostic on-demand information:
switch# show diagnostic ondemand setting
Related Commands Command
diagnostic ondemand
setting
Cisco Nexus 7000 Series NX-OS System Management Command Reference
458
show diagnostic ondemand setting
Configures the diagnostic on-demand setting.
Modification
This command was introduced.
Test iterations = 1
Action on test failure = continue until test failure limit reaches 1
Description
Configures the diagnostic on-demand setting.
Show Commands
OL-25806-03