Cisco Nexus 7000 Series Reference Manual page 639

Show Commands
show ptp time-property
To display the Precision Time Protocol (PTP) clock properties, use the show ptp time-property
command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.2(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the PTP clock properties:
switch# show ptp time-property
PTP CLOCK TIME PROPERTY:
Related Commands Command
show ptp brief
show ptp clock
show ptp clocks
foreign-masters-record
OL-25806-03
show ptp time-property
Modification
This command was introduced.
Current UTC Offset valid: 0
Current UTC Offset: 33
Leap59: 0
Leap61: 0
Time Traceable: 0
Frequency Traceable: 0
PTP Timescale: 0
Time Source: 0xA0(internal Osccilator)
Description
Displays the PTP status.
Displays the properties of the local clock.
Displays the state of foreign masters known to the PTP process.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show ptp time-property
611