Snmp-Server Host - Cisco Nexus 7000 Series Reference Manual

S Commands

snmp-server host

To specify the server host to receive Simple Network Management Protocol (SNMP) notifications, use
the snmp-server host command. To remove the SNMP server configuration, use the no form of this
command.
Syntax Description host-name
snmp-name
filter-vrf
vrf-name
default
management
informs
version
1
2c
3
auth
noauth
priv
source-interface
ethernet number
loopback number Specifies the virtual interface number. The range is from 0 to 1023.
mgmt number
OL-25806-03
snmp-server host host-name {snmp-name | filter-vrf {vrf-name | default | management}} |
informs {snmp-name | version {1 snmp-name | 2c snmp-name | 3 {auth snmp-name | noauth
snmp-name | priv snmp-name}}} | source-interface {ethernet number | loopback number |
mgmt number | port-channel number | vlan number} | traps {snmp-name | version {1
snmp-name | 2c snmp-name | 3 {auth snmp-name | noauth snmp-name | priv snmp-name}} |
use-vrf {vrf-name | default | management} | version {1 snmp-name | 2c snmp-name | 3 {auth
snmp-name | noauth snmp-name | priv snmp-name}} udp-port port
no snmp-server host host-name {snmp-name | filter-vrf {vrf-name | default | management}} |
informs {snmp-name | version {1 snmp-name | 2c snmp-name | 3 {auth snmp-name | noauth
snmp-name | priv snmp-name}}} | source-interface {ethernet number | loopback number |
mgmt number | port-channel number | vlan number} | traps {snmp-name | version {1
snmp-name | 2c snmp-name | 3 {auth snmp-name | noauth snmp-name | priv snmp-name}} |
use-vrf {vrf-name | default | management} | version {1 snmp-name | 2c snmp-name | 3 {auth
snmp-name | noauth snmp-name | priv snmp-name}} udp-port port
IP4 or IPv6 address or name of the host.
SNMP community string or SNMPv3 username. The maximum number of
alphanumeric characters is 32.
Specifies the virtual routing and forwarding (VRF) instance whose notifications
are to be filtered.
Name of the VRF. The maximum number of alphanumeric characters is 32.
Specifies the default VRF.
Specifies the management VRF.
Sends SNMP information to this host.
Specifies the SNMP version used to send notifications.
Specifies SNMPv1.
Specifies SNMPv2c.
Specifies SNMPv3.
Specifies the SNMPv3 authNoPriv security level.
Specifies the SNMPv3 noAuthNoPriv security level.
Specifies the SNMPv3 authPriv security level.
Specifies the source interface used to send SNMP notifications to this host.
Specifies the Ethernet IEEE 802.3z slot number and port number in this format:
1/1. The range for the slot number is from 1 to 18, and the range for the port
number is from 1 to 128.
Specifies the management interface number. The value is 0.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
snmp-server host
383