show running-config eem
show running-config eem
To display the Embedded Event Manager (EEM) running configuration, use the show running-config
eem command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows the Embedded Event Manager (EEM) running configuration:
switch# show running-config eem
switch(config)# show running-config eem
!Command: show running-config eem
!Time: Fri Jan 15 22:23:28 2010
version 5.0(2)
switch(config)#
Cisco Nexus 7000 Series NX-OS System Management Command Reference
622
show running-config eem
Modification
This command was introduced.
Show Commands
OL-25806-03