Cisco Nexus 7000 Series Reference Manual page 74

cfs region
In order to distribute configuration information, CFS distribution must be enabled for both the device
and the application.
CFS is enabled by default for the device. All devices in the fabric must have CFS enabled or they do not
receive distributions.
If CFS distribution is disabled for an application, then that application does not distribute any
configuration and it does not accept a distribution from other devices in the fabric.
This command does not require a license.
Examples This example shows how to create region 4 and add the NTP application to it. When you create a region,
the CLI places you into region configuration mode for that region, where you can then add an
application.
switch(config)# cfs region 4
switch(config-cfs-region)# callhome
switch(config-cfs-region)# show cfs region brief
---------------------------------------
Region
---------------------------------------
switch(config-cfs-region)#
Related Commands
show cfs region
show cfs status
application_name
distribute
show application_name
status
Cisco Nexus 7000 Series NX-OS System Management Command Reference
46
Application
4 ntp
4 callhome
6 igmp
6 radius
Displays the CFS distribution region(s) configured for the device.
Displays the CFS distribution status.
Enables distribution for the specified application, such as NTP.
Displays the status of the specified application, such as NTP, including
whether CFS distribution is enabled for the application.
Enabled
no
no
yes
no
C Commands
OL-25806-03