Clear Hardware Flow Ip - Cisco Nexus 7000 Series Reference Manual

C Commands

clear hardware flow ip

To clear the NetFlow hardware IP flow, use the clear hardware flow ip command.
Syntax Description vdc vdc_id
monitor name
profile
profile-id
vlan vlan-id
interface
if-type
if-number
instance inst
force-export
module num
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to clear the NetFlow hardware IP flow:
switch(config)# clear hardware flow ip module 8 ethernet 2/1
switch(config)#
OL-25806-03
clear hardware flow ip [{{vdc vdc_id} | {monitor name} | {profile profile-id} | {vlan vlan-id} |
{interface if-type if-number}}] [instance inst] [force-export] [module num]
Specifies the VDC. The range is from 1 to 16.
Specifies the name of the NetFlow flow monitor. The monitor name can be any
case-sensitive, alphanumeric string up to 64 characters.
Specifies the name of the flow profile. The range is from 1 to 31.
Specifies the VLAN. The range is from 1 to 4094.
Specifies the interface.
Interface type. For more information, use the question mark (?) online help function.
Interface or subinterface number. For more information about the numbering syntax
for your networking device, use the question mark (?) online help function.
(Optional) Specifies the EARL instance. The EARL instance can be any
alphanumeric string up to 32 characters.
(Optional) Forces data to be exported to the collector prior to the clear operation.
(Optional) Specifies the module.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
clear hardware flow ip
57