Logging Event - Cisco Nexus 7000 Series Reference Manual

logging event

logging event
To log interface events, use the logging event command.
Syntax Description link-status
trunk-status
default
enable
Defaults
None
Command Modes
Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to log interface events:
switch# configure terminal
switch(config)# logging event link-status default
switch(config)#
Related Commands Command
show logging
Cisco Nexus 7000 Series NX-OS System Management Command Reference
244
logging event {link-status | trunk-status} {enable | default}
no logging event {link-status | trunk-status} {enable | default}
Logs all UP/DOWN and CHANGE messages.
Logs all TRUNK status messages.
Specifies that the default logging configuration is used by interfaces not explicitly
configured.
Specifies to enable logging to override the port level configuration.
Modification
This command was introduced.
Description
Displays the logging status.
L Commands
OL-25806-03