Diagnostic Test Simulation Clear - Cisco Nexus 7000 Series Reference Manual

diagnostic test simulation clear

diagnostic test simulation clear
To clear a diagnostic test simulation for a module, use the diagnostic test simulation clear command
Syntax Description
module number
test test-id
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to clear the diagnostic test simulation:
switch# diagnostic test simulation module 2 test 2 clear
switch#
Related Commands Command
diagnostic test
simulation
Cisco Nexus 7000 Series NX-OS System Management Command Reference
132
diagnostic test simulation module number test test-id clear
Specifies the diagnostic test simulation module number. The range is from 1 to
the number of modules in the chassis.
Specifies the test ID. The range is from 1 to 15.
Modification
This command was introduced.
Description
Simulates a diagnostic test.
D Commands
OL-25806-03