Cdp Timer - Cisco Nexus 7000 Series Reference Manual

cdp timer

cdp timer
To configure the Cisco Discovery Protocol (CDP) refresh time interval, use the cdp timer command. To
remove the CDP refresh time interval configuration, use the no form of this command.
Syntax Description seconds
Defaults
None
Command Modes Global configuration mode (config)
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the CDP refresh time interval:
switch(config)# cdp timer 45
switch(config)#
This example shows how to remove the CDP refresh time interval:
switch(config)# no cdp timer 45
switch(config)#
Related Commands Command
cdp holdtime
Cisco Nexus 7000 Series NX-OS System Management Command Reference
40
cdp timer seconds
no cdp timer seconds
Time interval in seconds. The range is from 5 to 254.
Modification
This command was introduced.
Description
Configures the time that CDP holds onto neighbor information before
refreshing it.
C Commands
OL-25806-03