Show Ntp Session Status - Cisco Nexus 7000 Series Reference Manual

show ntp session status

show ntp session status
To display the Network Time Protocol (NTP) session status, use the show ntp session status command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.1(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to display the NTP session status:
switch# show ntp session status
Last Action Time Stamp
Last Action
Last Action Result
Last Action Failure Reason : none
switch#
Related Commands Command
show ntp source
show ntp peers
Cisco Nexus 7000 Series NX-OS System Management Command Reference
572
show ntp session status
Modification
This command was introduced.
: Thu Aug 1 16:22:00 20
: Distribution Enable
: Success
Description
Displays information about the NTP source.
Displays information about NTP peers.
Show Commands
OL-25806-03