Show Cfs Application - Cisco Nexus 7000 Series Reference Manual

Show Commands

show cfs application

To display information about applications that are currently enabled to use Cisco Fabric Services (CFS)
distribution, use the show cfs application command.
Syntax Description name
application_name
Defaults
None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.1(2)
Usage Guidelines This command does not require a license.
Examples This example shows how to display CFS information about applications that are currently enabled to use
CFS distribution:
switch# show cfs application
----------------------------------------------
Application
----------------------------------------------
ntp
stp
vpc
igmp
l2fm
role
radius
callhome
Total number of entries = 8
This example shows how to display CFS information about the Call Home application:
OL-25806-03
show cfs application [name application_name]
(Optional) Displays the name of a specific application.
Modification
This command was introduced.
Enabled
No
Yes
Yes
Yes
Yes
No
No
Yes
Cisco Nexus 7000 Series NX-OS System Management Command Reference
Scope
Physical-fc-ip
Physical-eth
Physical-eth
Physical-eth
Physical-eth
Physical-fc-ip
Physical-fc-ip
Physical-fc-ip
show cfs application
433