Xml Server Timeout - Cisco Nexus 7000 Series Reference Manual

xml server timeout

xml server timeout
To configure the XML server session timeout, use the xml server timeout command. To reset the
timeout to the default, use the no form of this command.
Syntax Description timeout
session_id
Defaults
The timeout is 1200 seconds.
Command Modes Global configuration mode (config)
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines You can apply the XML server timeout only to active sessions.
This command does not require a license.
Examples This example shows how to configure the XML server timeout for active sessions:
switch(config)# xml server timeout 800
This example shows how to reset the timeout to the default:
switch(config)# no xml server timeout 800
Cisco Nexus 7000 Series NX-OS System Management Command Reference
710
xml server timeout timeout [session_id]
no xml server timeout timeout [session_id]
Timeout in seconds. The range is from 0 to 1200. The default is 1200.
(Optional) XML server session number. The range is from 0 to 2147483647.
Modification
This command was introduced.
X Commands
OL-25806-03