show ntp rts-update
show ntp rts-update
To display if the request to send (RTS) update is enabled, use the show ntp rts-update command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release
4.1(2)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to view RTS-update information:
switch(config)# show ntp rts-update
RTS update is enabled
switch(config)#
Related Commands
Command
show ntp source-inter-
face
Cisco Nexus 7000 Series NX-OS System Management Command Reference
574
show ntp rts-update
Modification
This command was introduced.
Description
Displays information about the NTP source.
Show Commands
OL-25806-03