Show Lldp Interface Ethernet - Cisco Nexus 7000 Series Reference Manual

show lldp interface ethernet

show lldp interface ethernet
To display the Link Layer Discovery Protocol (LLDP) configuration on the interface, use the show lldp
interface ethernet command.
Syntax Description slot/port-number Slot number and port number in this format: slot/port-number. The range is from 1
Defaults
None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to display the LLDP configuration on the interface:
switch(config)# show lldp interface ethernet 6/3
Interface Information:
Enable (tx/rx/dcbx): Y/Y/Y
switch(config)#
Related Commands Command
show lldp traffic
interface ethernet
show running-config
lldp
lldp transmit
lldp receive
Cisco Nexus 7000 Series NX-OS System Management Command Reference
522
show lldp interface ethernet slot/port-number
to 253.
Modification
This command was introduced.
Description
Displays the number of LLDP packets sent and received on the interface.
Displays the global LLDP configuration.
Enables the transmission of LLDP packets on an interface.
Enables the reception of LLDP packets on an interface.
Port Mac address: 00:24:f7:19:84:72
Show Commands
OL-25806-03