Erspan-Id - Cisco Nexus 7000 Series Reference Manual

erspan-id

erspan-id
To configure the flow ID for an Encapsulated Remote Switched Port Analyzer (ERSPAN)) session, use
the erspan-id command.
Syntax Description flow_id
Defaults None
Command Modes
config-erspan-src
Supported User Roles network-admin
network-operator
Command History Release
5.1(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to configure the flow ID for an ERSPAN session:
switch# configure terminal
switch(config)# monitor session 5 type erspan-source
switch(config-erspan-src)# erspan-id 100
switch(config-erspan-src)#
Related Commands Command
ip dscp
ip ttl
vrf
monitor-session
Cisco Nexus 7000 Series NX-OS System Management Command Reference
138
erspan-id flow_id
ERSPAN flow ID. The range is from 1 to 1023.
Modification
This command was introduced.
Description
Configures the DSCP value of the packets in the ERSPAN traffic.
Configures the IP time-to-live (TTL) value of the ERSPAN traffic.
Configures the VRF for ERSPAN traffic forwarding.
Enters the monitor configuration mode for configuring an ERSPAN or
SPAN session for analyzing traffic between ports.
E Commands
OL-25806-03