Cisco Nexus 7000 Series Reference Manual page 192

event snmp
entry-val value
exit-comb
or
and
exit-op op
exit-val value
poll-interval value Specifies the time interval between consecutive polls. The value argument is an
Defaults
None
Command Modes
Embedded event manager
Supported User Roles network-admin
vdc-admin
Command History Release
5.2.(1)
4.0(1)
Usage Guidelines
This command does not require a license.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
164
Specifies the value with which the contents of the current object ID are compared
to decide if an SNMP event should be raised.
(Optional) Indicates the combination of exit conditions that must be met before
event monitoring is reenabled.
(Optional) Specifies that an exit comparison operator and an exit object ID value
or an exit time value must exist.
(Optional) Specifies that an exit comparison operator, an exit object ID value, and
an exit time value must exist.
(Optional) Compares the contents of the current object ID with the exit value
using the specified operator:
gt—Greater than
•
ge—Greater than or equal to
•
eq—Equal to
•
ne—Not equal to
•
lt—Less than
•
le—Less than or equal to
•
If there is a match, an event is triggered and event monitoring is reenabled.
Note This keyword and its argument are not optional if the exit-comb keyword
is defined.
(Optional) Specifies the value with which the contents of the current object ID are
compared to decide whether the exit criteria are met.
This keyword and its argument are not optional if the exit-comb keyword
Note
is defined.
integer that represents seconds in the range from 1 to 4294967295. The minimum
polling interval is 1 second.
Modification
Added the tag tag keywords.
This command was introduced.
E Commands
OL-25806-03