Logging Monitor - Cisco Nexus 7000 Series Reference Manual

L Commands

logging monitor

To log messages to the monitor (terminal line), use the logging monitor command to enable the device.
To disable monitor log messages, use the no form of this command.
Syntax Description severity-level
Defaults 5
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This configuration applies to Telnet and SSH sessions.
This command does not require a license.
OL-25806-03
logging monitor [severity-level]
no logging monitor
(Optional) Number of the desired severity level at which messages should be
logged. Messages at or numerically lower than the specified level are logged.
Severity levels are as follows:
• 0—emergency: System unusable
1—alert: Immediate action needed
•
2—critical: Critical condition—default level
•
3—error: Error condition
•
4—warning: Warning condition
•
5—notification: Normal but significant condition
•
• 6—informational: Informational message only
• 7—debugging: Appears during debugging only
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
logging monitor
255