Snmp-Server Location - Cisco Nexus 7000 Series Reference Manual

S Commands

snmp-server location

To configure the device location used by the Simple Network Management Protocol (SNMP), use the
snmp-server location command. To remove the location, use the no form of this command.
Syntax Description location
Defaults None
Command Modes Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to set the SNMP location:
switch# config terminal
switch(config)# snmp-server location SanJose
Related Commands Command
show snmp
OL-25806-03
snmp-server location [location]
no snmp-server location [location]
(Optional) System location. The location can be any alphanumeric string up
to 255 characters.
Modification
This command was introduced.
Description
Displays information about SNMP.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
snmp-server location
387