Callhome Test - Cisco Nexus 7000 Series Reference Manual

C Commands

callhome test

To send a test message to all configured Call home destinations, use the callhome test command.
Syntax Description
inventory
Defaults None
Command Modes Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to send a Call home test message:
switch(config)# callhome test
trying to send test callhome message
switch(config)#
Related Commands Command
callhome
callhome send
show callhome
OL-25806-03
callhome test {inventory}
Sends a dummy callhome inventory to all configured Call home destinations.
Modification
This command was introduced.
Description
Enters the Call home configuration mode.
Sends a configuration or diagnostic message to all configured Call home
destinations.
Displays the Call home configuration.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
callhome test
35