Option Interface-Table Timeout - Cisco Nexus 7000 Series Reference Manual

O Commands

option interface-table timeout

To configure the NetFlow exporter interface-table timer, use the option interface-table timeout
command. To remove the interface-table timer, use the no form of this command.
Syntax Description time
Defaults
None
Command Modes NetFlow exporter version 9 configuration (config-flow-exporter-version-9)
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the NetFlow exporter interface-table timer:
switch(config)# flow exporter Custom-Flow-Exporter-1
switch(config-flow-exporter)# version 9
switch(config-flow-exporter-version-9)# option interface-table timeout 1200
switch(config-flow-exporter-version-9)#
This example shows how to remove the NetFlow exporter interface-table timer configuration:
switch(config-flow-exporter-version-9)# no option interface-table timeout
Related Commands Command
show flow exporter
OL-25806-03
option interface-table timeout time
no option interface-table timeout [time]
Time in seconds. The range is from 1 to 86400.
Modification
This command was introduced.
Description
Displays information about the NetFlow exporters.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
option interface-table timeout
319