Monitor Erspan Origin Ip-Address - Cisco Nexus 7000 Series Reference Manual

monitor erspan origin ip-address

monitor erspan origin ip-address
To configure the Encapsulated Remote Switched Port Analyzer (ERSPAN) origin IP address, use the
monitor erspan origin ip-address command. To remove the ERSPAN origin IP address configuration,
use the no form of this command.
Syntax Description
ip-address
global
Defaults None
Command Modes
Global configuration mode (config)
Supported User Roles network-admin
vdc-admin
Command History Release
5.1(1)
Usage Guidelines
The global origin IP address can be configured in either the default VDC or the admin VDC. The value
that is configured in this VDC is valid across all VDCs.
When you change the origin IP address in the default VDC, it impacts all of the sessions.
This command does not require a license.
Examples This example shows how to configure the ERSPAN origin IP address:
switch# configure terminal
switch(config)# monitor erspan origin ip-address 10.1.1.1 global
switch(config)#
This example shows how to remove the ERSPAN IP address:
switch# configure terminal
switch(config)# no monitor erspan origin ip-address 10.1.1.1 global
switch(config)#
Cisco Nexus 7000 Series NX-OS System Management Command Reference
274
monitor erspan origin ip-address ip-address global
no monitor erspan origin ip-address ip-address global
Global origin IP address.
(Optional) Specifies the default virtual device context (VDC) configuration
across all VDCs.
Modification
This command was introduced.
M Commands
OL-25806-03