Show Snmp Source-Interface - Cisco Nexus 7000 Series Reference Manual

Show Commands

show snmp source-interface

To display the Simple Network Management Protocol (SNMP) source interface through which
notifications are sent, use the show snmp source-interface command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.2(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the SNMP source interface through which notifications are sent:
switch(config)# show snmp source-interface
-------------------------------------------------------------------
Notification
-------------------------------------------------------------------
trap
inform
-------------------------------------------------------------------
switch(config)#
Related Commands Command
snmp-server source-
interface
OL-25806-03
show snmp source-interface
Modification
This command was introduced.
Description
Configures an SNMP source interface through which notifications are sent.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
source-interface
lookback1
Ethernet1/1
show snmp source-interface
645