Clear Ip Lisp Data-Cache Lsp-6 - Cisco Nexus 7000 Series Command Reference Manual

clear ip lisp data-cache
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
clear ip lisp data-cache
To clear the LISP IPv4 data-cache, use the clear ip lisp data-cache command.
Syntax Description
vrf vrf-name
EID
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
vdc-admin
Command History Release
5.0(1.13)
The clear ip lisp data-cache command removes all IPv4 endpoint identifier to Routing Locator
Usage Guidelines
(EID-to-RLOC) mapping in the forwarding data-cache. Data-cache entries are present in two cases only:
when the ip lisp itr send-data-probe command entered, after a data-probe is sent, this data-probe is
stored in the data cache until a Map-Reply is returned, when you enter the ip lisp etr glean-mapping
command, gleaned EID-to-RLOC mapping data is stored in the data cache until the data is verified.
When you use the optional vrf keyword, the data-cache is cleared for the specified VRF. When the EID
option is used, only the EID-to-RLOC mapping for that entry is cleared.
This command does not require a license.
This example shows how to clear the LISP IPv4 data cache:
Examples
switch# clear ip lisp data-cache
Related Commands Command
show ip lisp
data-cache
Cisco Nexus 7000 Series NX-OS LISP Command Reference
LSP-6
clear ip lisp data-cache [vrf vrf-name] [EID]
(Optional) Specifies virtual routing and forwarding (VRF) instance with which
to clear the data cache.
(Optional) IPv4 EID to clear from LISP data-cache.
Modification
This command was introduced.
Description
Displays the LISP IPv4 EID-to-RLOC data-cache mapping on an ITR.
Cisco Nexus 7000 Series LISP Commands