Cisco Nexus 7000 Series Reference Manual page 532

show hardware flow
show hardware flow
To display information about NetFlow hardware IP flows, use the show hardware flow ip command.
Syntax Description ip
ipv6
interface interface-type
number
monitor monitor-name
profile profile-id
vdc vdc-name
detail
module slot-number
Defaults None
Command Modes Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines You must have already enabled traffic monitoring with Flexible NetFlow before you can use the
show hardware flow ip command.
This command does not require a license.
Examples
This example shows how to display the NetFlow aging values for module 8:
switch(config)# show hardware flow ip module 8
Cisco Nexus 7000 Series NX-OS System Management Command Reference
504
show hardware flow {ip | ipv6} [interface type number | monitor monitor-name | profile profile-id
| vdc vdc-name | vlan vlan-name] [detail] [module module]
Displays information about the IP flows.
Displays information about the IPv6 flows.
(Optional) Specifies the type of interface that you want to view Flexible
NetFlow accounting configuration information on.
(Optional) Specifies the name of the flow monitor. The monitor name can be
any case-sensitive, alphanumeric string up to 64 characters.
(Optional) Specifies the name of the flow profile. The profile ID range is
from 0 to 31.
(Optional) Specifies the virtual device context (VDC) name. The VDC name
can be any case-sensitive, alphanumeric string up to 64 characters.
(Optional) Displays detailed information about the flows.
(Optional) Displays information specific to a module.
Modification
This command was introduced.
Show Commands
OL-25806-03