Record Netflow Ipv6 - Cisco Nexus 7000 Series Reference Manual

R Commands

record netflow ipv6

To select a NetFlow IPv6 record for the NetFlow monitor, use the record netflow ipv6 command. To
remove the record selection, use the no form of this command.
Syntax Description original-input
original-
output
protocol-port
Defaults None
Command Modes NetFlow monitor configuration (config-flow-monitor)
Supported User Roles network-admin
vdc-admin
Command History Release
4.1(3)
Usage Guidelines This command does not require a license.
Examples
This example shows how to select a NetFlow IPv6 record for the NetFlow monitor:
switch(config)# flow monitor Custom-NetFlow-Record-1
switch(config-flow-monitor)# record netflow ipv6 original-input
This example shows how to remove the NetFlow IPv6 record selection:
switch(config-flow-monitor)# no record netflow ipv6 original-input
switch(config-flow-monitor)#
Related Commands Command
show flow sw-monitor
OL-25806-03
record netflow ipv6 {original-input | original-output | protocol-port}
no record netflow ipv6 {original-input | original-output | protocol-port}
Specifies the traditional IPv6 input NetFlow.
Specifies the traditional IPv6 output NetFlow.
Specifies the protocol and ports aggregation scheme.
Modification
This command was introduced.
Description
Displays information about NetFlow monitors.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
record netflow ipv6
351