Show Running-Config Ntp - Cisco Nexus 7000 Series Reference Manual

Show Commands

show running-config ntp

To display the Network Time Protocol (NTP) configuration that is currently running on the system, use
the show running-config ntp command.
Syntax Description all
Defaults None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the NTP configuration that is currently running:
switch(config)# show running-config ntp
!Command: show running-config ntp
!Time: Fri Jan 15 22:28:34 2010
version 5.0(2)
ntp server 190.0.2.10
ntp server 192.0.2.10 prefer use-vrf RED key 786
ntp peer 2001:db8::4101
ntp authentication-key 3 md5 fewhg 7
ntp authentication-key 34567 md5 qabzk7f 7
ntp logging
ntp access-group peer abcd*123
switch(config)#
OL-25806-03
show running-config ntp [all]
(Optional) Displays all of the NTP running configuration.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show running-config ntp
627