Tools And Test Equipment; Required Tools And Test Equipment; Node Fastener Torque Specifications - Cisco GS7000 Installation And Configuration Manual

Chapter 2 Installation

Tools and Test Equipment

Required Tools and Test Equipment

The following tools and equipment are required for installation.

Torque wrench capable of 5 to 12 ft-lbs (6.8 to 16.3 Nm)

4-inch to 6-inch extension for torque wrench

1/2-inch socket for strand clamp bolts and cover bolts

1/4-inch flat-blade screwdriver

#2 Phillips-head screwdriver

Long-nose pliers

1/2-inch deep-well socket for seizure connector

True-rms digital voltmeter (DVM)

EXFO FOT 22AX optical power meter with adapters

Optical connector cleaning supplies

Optical connector microscope with appropriate adapters for your optical
connectors

Node Fastener Torque Specifications

Be sure to follow these torque specifications when assembling/mounting the node.
Fastener
Housing closure bolts
Fiber port plugs
Housing plugs
Strand clamp mounting bracket bolts
Pedestal mounting bolts
Module securing screws
(EDFA, OPSW, PS, and SM/LCM
modules)
AC entry module shoulder screws
(cross head screw)
12
Torque Specification
5 to 12 ft-lbs
(6.8 to 16.3 Nm)
5 to 8 ft-lbs
(6.8 to 10.8 Nm)
5 to 8 ft-lbs
(6.8 to 10.8 Nm)
8 to 10 ft-lbs
(10.8 to 13.6 Nm)
25 to 30 in-lbs
(2.8 to 3.4 Nm)
18 to 20 in-lbs
(2.0 to 2.3 Nm)
Illustration
OL-29936-01