Snmp-Server Location - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

snmp-server location

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
snmp-server location
To modify system location, use snmp-server location command. To remove the SNMP server
location,use the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
None.
Command Modes
Configuration mode.
Command History Release
4.1(1b)
Usage Guidelines None.
Examples
The following example sets the SNMP server community string:
switch# config t
switch(config)# snmp-server location line
switch(config)#
Related Commands Command
show snmp
Cisco MDS 9000 Family Command Reference
21-54
snmp-server location
no snmp-server location
Modification
This command was introduced.
Description
Displays SNMP information.
Chapter 21 S Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x