Diagnostic Schedule Test - Cisco ME 3800X Command Reference Manual

diagnostic schedule test

diagnostic schedule test
To configure the diagnostic test schedule, use the diagnostic schedule test command in global configuration
mode. to remove the schedule, use the no form of this command.
Syntax Description name
test-id
test-id-range
all
basic
daily hh:mm
on mm dd yyyy
hh:mm
weekly day-of-week
hh:mm
Defaults
This command has no default settings.
Command Modes Global configuration
Command History Release
12.2(52)EY
Cisco ME 3800X and ME 3600X Switch Command Reference
2-58
diagnostic schedule test {name | test-id | test-id-range | all | basic} {daily hh:mm | on mm dd yyyy
hh:mm | weekly day-of-week hh:mm}
no diagnostic schedule test {name | test-id | test-id-range | all | basic} {daily hh:mm |
on mm dd yyyy hh:mm | weekly day-of-week hh:mm}
Specifies the name of the test. To display the test names in the test-ID list, enter
the show diagnostic
Specifies the ID number of the test. The range is from 1 to 6. To display the test
numbers in the test-ID list, enter the
command.
Specifies more than one test with the range of test ID numbers. Enter the range
as integers separated by a comma and a hyphen (for example, 1,3-6 specifies
test IDs 1, 3, 4, 5, and 6). To display the test numbers in the test-ID list, enter
the show diagnostic
Specifies all of the diagnostic tests.
Specifies the basic on-demand diagnostic tests.
Specifies the daily scheduling of the diagnostic tests.
hh:mm—Enter the time as a 2-digit number (for a 24-hour clock) for
hours:minutes; the colon (:) is required, such as 12:30.
Specifies the scheduling of the diagnostic tests on a specific day and time.
For mm dd yyyy:
mm—Spell out the month, such as January, February, and so on, with
•
upper-case or lower-case characters.
dd—Enter the day as a 2-digit number, such as 03 or 16.
•
yyyy—Enter the year as a 4-digit number, such as 2008.
•
Specifies the weekly scheduling of the diagnostic tests.
day-of-week—Spell out the day of the week, such as Monday, Tuesday, and so
on, with upper-case or lower-case characters.
Modification
This command was introduced.
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
content privileged EXEC command.
show diagnostic
content privileged EXEC command.
content privileged EXEC
OL-28238-01