Cisco Catalyst 4500 Series Configuration Manual page 554

mvr (global configuration)
The following example shows how to return the maximum query response time to the default setting of
one-half second:
Switch(config)# no mvr querytime
The following example shows how to set VLAN 2 as the multicast VLAN:
Switch(config)# mvr vlan 2
You can verify your settings by entering the show mvr privileged EXEC command.
Related Commands Command
mvr (interface configuration)
show mvr
show mvr interface
show mvr members
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-514
Description
Configures MVR ports.
Displays MVR global parameters or port parameters.
Displays the configured MVR interfaces with their type, mode,
VLAN, status and Immediate Leave configuration, and can also
displays all MVR groups of which the interface is a member.
Displays all ports that are members of an MVR multicast group;
if the group has no members, its status is shown as Inactive.
Chapter 2