Cisco Catalyst 4500 Series Configuration Manual page 712

shell trigger
shell trigger
Use the shell trigger global configuration command to create a user defined trigger. Use the no form of
this command to delete the trigger.
Syntax Description
identifier
description
Command Default There are system-defined event triggers:
•
•
•
•
•
•
•
Command Modes
Global configuration
Command History Release
12.2(50)SE
Usage Guidelines
Use this command to create user-defined event triggers in conjunction with the macro auto execute
global configuration command.
To support dynamic device discovery when using 802.1X authentication, configure the RADIUS
authentication server to support the Cisco attribute-value (AV) pair: auto-smart-port=event trigger.
This command is mainly used for 802.1X authentication based triggers provided 802.1X or MAB is
supported, enabling you to map new platform strings or device IDs to their respective macros or
functions.
Examples The following example shows how to create a user-defined event trigger called
RADIUS_MAB_EVENT:
Switch# configure terminal
Switch(config)# shell trigger RADIUS_MAB_EVENT MAC_AuthBypass Event
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-672
shell trigger identifier description
no shell trigger identifier description
Specifies the event trigger identifier. The identifier should have no spaces or
hyphens between words.
Specifies the event trigger description text.
CISCO_PHONE_EVENT
CISCO_SWITCH_EVENT
CISCO_ROUTER_EVENT
CISCO_WIRELESS_AP_EVENT
CISCO_WIRELESS_LIGHTWEIGHT_AP_EVENT
DMP
IPVSC
Modification
This command was introduced on the Catalyst 4500 series switch.
Chapter 2