Cisco Catalyst 4500 Series Configuration Manual page 213
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
debug pppoe intermediate-agent
To turn on debugging of the PPPoE Intermediate Agent feature, use the debug pppoe
intermediate-agent command. To turn off debugging, use the no form of this command.
Syntax Description
event
packet
all
Command Default
All debugging is turned off.
Command Modes
Privileged EXEC mode
Command History
Release
12.2(50)SG
Examples
The following example shows how to turn on packet debugging:
Switch# debug pppoe intermediate-agent packet
PPPOE IA Packet debugging is on
*Sep
interface: Gi3/7, vlan : 2 MAC da: ffff.ffff.ffff, MAC sa: aabb.cc00.0000
*Sep
(GigabitEthernet3/4)
*Sep
(GigabitEthernet3/8)
*Sep
interface: Gi3/4, vlan : 2 MAC da: aabb.cc00.0000, MAC sa: 001d.e64c.6512
*Sep
interface: Gi3/8, vlan : 2 MAC da: aabb.cc00.0000, MAC sa: aabb.cc80.0000
*Sep
(GigabitEthernet3/7)
*Sep
interface: Gi3/7, vlan : 2 MAC da: 001d.e64c.6512, MAC sa: aabb.cc00.0000
*Sep
(GigabitEthernet3/4)
*Sep
interface: Gi3/4, vlan : 2 MAC da: aabb.cc00.0000, MAC sa: 001d.e64c.6512
The following example shows how to turn off packet debugging:
Switch# debug pppoe intermediate-agent packet
PPPOE IA Packet debugging is off
debug pppoe intermediate-agent {event | packet | all}
no debug pppoe intermediate-agent {event | packet | all}
Activates event debugging
Activates packet debugging
Activates both event and packet debugging
Modification
This command was introduced on the Catalyst 4500 series switch.
2 06:12:56.133: PPPOE_IA: Process new PPPoE packet, Message type: PADI, input
2 06:12:56.137: PPPOE_IA: received new PPPOE packet from inputinterface
2 06:12:56.137: PPPOE_IA: received new PPPOE packet from inputinterface
2 06:12:56.137: PPPOE_IA: Process new PPPoE packet, Message type: PADO, input
2 06:12:56.137: PPPOE_IA: Process new PPPoE packet, Message type: PADO, input
2 06:12:56.137: PPPOE_IA: received new PPPOE packet from inputinterface
2 06:12:56.137: PPPOE_IA: Process new PPPoE packet, Message type: PADR, input
2 06:12:56.145: PPPOE_IA: received new PPPOE packet from inputinterface
2 06:12:56.145: PPPOE_IA: Process new PPPoE packet, Message type: PADS, input
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
debug pppoe intermediate-agent
2-175
Advertisement
Table of Contents
