Show Slavebootflash - Cisco Catalyst 4500 Series Configuration Manual

show slavebootflash:

show slavebootflash:
To display information about the standby bootflash file system, use the show slavebootflash: command.
Syntax Description
all
chips
filesys
Command Default This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(8a)EW
Examples The following example shows how to display file system status information:
Switch# show slavebootflash: filesys
-------- F I L E
Device Number = 0
DEVICE INFO BLOCK: bootflash
Magic Number
Length
Programming Algorithm = 39
File System Offset
MONLIB Offset
Bad Sector Map Offset = 3FFF8
Squeeze Log Offset
Squeeze Buffer Offset = FC0000
Num Spare Sectors
STATUS INFO:
Writable
NO File Open for Write
Complete Stats
No Unrecovered Errors
No Squeeze in progress
USAGE INFO:
Bytes Used
Bad Sectors
OK Files
Deleted Files
Files w/Errors = 0
Switch>
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-962
show slavebootflash: [all | chips | filesys]
(Optional) Displays all possible Flash information.
(Optional) Displays Flash chip information.
(Optional) Displays file system information.
Modification
This command was introduced on the Catalyst 4500 series switch.
S Y S T E M
= 6887635
= 1000000
= 40000
= 100
= F80000
= 0
Spares:
= 917CE8
= 0
= 2
= 0
S T A T U S --------
File System Vers = 10000
Sector Size
Erased State
Length = F40000
Length = C628
Length = 8
Length = 40000
Length = 40000
Bytes Available = 628318
Spared Sectors = 0
Bytes = 917BE8
Bytes = 0
Bytes = 0
(1.0)
= 40000
= FFFFFFFF
Chapter 2
OL-30934-01