Cisco Catalyst 4500 Series Configuration Manual page 222

debug sw-vlan
debug sw-vlan
To debug the VLAN manager activities, use the debug sw-vlan command. To disable the debugging
output, use the no form of this command.
Syntax Description
badpmcookies
events
management
packets
registries
Command Default
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
Examples
The following example shows how to debug the software VLAN events:
Switch# debug sw-vlan events
vlan manager events debugging is on
Switch#
Related Commands Command
undebug sw-vlan (same as no debug
sw-vlan)
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-184
debug sw-vlan {badpmcookies | events | management | packets | registries}
no debug sw-vlan {badpmcookies | events | management | packets | registries}
Displays the VLAN manager incidents of bad port manager cookies.
Debugs the VLAN manager events.
Debugs the VLAN manager management of internal VLANs.
Debugs the packet handling and encapsulation processes.
Debugs the VLAN manager registries.
Modification
This command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Disables debugging output.
OL-30934-01