Clear Interface Vlan - Cisco Catalyst 4500 Series Configuration Manual
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
clear interface vlan
To clear the hardware logic from a VLAN, use the clear interface vlan command.
Syntax Description
number
Command Default
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History
Release
12.1(8a)EW
12.1(12c)EW
Examples
The following example shows how to clear the hardware logic from a specific VLAN:
Switch# clear interface vlan 5
Switch#
Related Commands
Command
show interfaces status
clear interface vlan number
Number of the VLAN interface; valid values are from 1 to 4094.
Modification
This command was introduced on the Catalyst 4500 series switch.
Support for extended VLAN addresses added.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Displays the interface status.
clear interface vlan
2-107
Advertisement
Table of Contents
